SN-TX Series – Signal Surge Protective Device
DIN-Rail Signal Surge Protector for RS-485, Control & Communication Systems, 12VDC, MAx: 10KA
Product Introduction
The SN-TX Series Signal Surge Protective Device (SPD) is designed to protect sensitive electronic equipment from transient overvoltage caused by lightning and electrical switching surges.
It provides reliable surge protection for low-voltage signal, control, and communication circuits used in industrial and commercial environments.
The device incorporates high-performance surge protection components to suppress harmful voltage spikes before they reach connected equipment.
With an ultra-fast response time of ≤ 1 ns, the SN-TX Series helps minimize the risk of damage to sensitive electronic circuits.
Its low insertion loss of ≤ 0.5 dB helps maintain signal transmission quality during normal operation.
The product is available in multiple rated voltage options, ranging from 5 VDC to 230 VDC, to accommodate different system requirements.
Its compact, space-saving housing is designed for easy installation on a standard 35 mm DIN rail.
The integrated protective earth (PE) connection provides a discharge path for transient surge energy when properly grounded.
The SN-TX Series is suitable for industrial automation, security systems, building management, and telecommunications applications.
With its durable construction, wide operating temperature range, and maintenance-free design, the SN-TX Series offers a practical solution for protecting critical signal and communication equipment.
Key Features
-
High-performance surge protection against lightning-induced and switching transients.
-
Ultra-fast response time of ≤ 1 ns.
-
Nominal discharge current (In) of 10 kA (8/20 µs), as stated in the datasheet.
-
Low insertion loss of ≤ 0.5 dB.
-
Transmission bandwidth up to 20 MHz.
-
Multiple rated operating voltages: 5, 12, 24, 36, 48, 110, 220, and 230 VDC.
-
Voltage protection level (Up) of ≤ 60 V, depending on model.
-
Standard 35 mm DIN-rail mounting.
-
Compact dimensions of 90 × 18 × 68 mm.
-
Integrated protective earth (PE) connection.
-
Flame-retardant plastic enclosure.
-
IP20 ingress protection rating.
-
Wide operating temperature range from -45°C to +75°C.
-
Screw terminal connections supporting conductors up to 1.5 mm².
-
Maintenance-free design for industrial and commercial installations.
Applications
-
Industrial Automation Systems: Surge protection for PLCs, controllers, remote I/O modules, and industrial control signal circuits.
-
RS-485 Communication Networks: Protection of compatible differential communication lines used in industrial monitoring and control systems.
-
CCTV & Security Systems: Protection of compatible low-voltage control and communication interfaces in security installations.
-
Building Management Systems (BMS): Protection of control and monitoring communication circuits in intelligent buildings.
-
Telecommunication Systems: Surge protection for compatible low-voltage communication and signal interfaces.
-
SCADA Systems: Protection of signal connections between monitoring equipment, controllers, and remote terminal units.
-
Access Control Systems: Protection of compatible control and communication wiring.
-
Industrial Monitoring Systems: Protection of field instruments, sensors, and monitoring equipment against transient overvoltage.



Technical Specifications
| Parameter |
Specification |
| Product Series |
SN-TX Series |
| Product Type |
Signal Surge Protective Device (SPD) |
| Rated Operating Voltage (Un) |
5 / 12 / 24 / 36 / 48 / 110 / 220 / 230 VDC |
| Maximum Continuous Voltage (Uc) |
6 / 13.5 / 27 / 42 / 58 / 135 / 275 / 300 VDC |
| Nominal Discharge Current (In) |
10 kA (8/20 µs), per datasheet |
| Maximum Discharge Current (Imax) |
5 kA (8/20 µs), per datasheet; requires confirmation |
| Voltage Protection Level (Up) |
≤ 60 V (model-dependent) |
| Response Time |
≤ 1 ns |
| Transmission Bandwidth |
20 MHz |
| Insertion Loss |
≤ 0.5 dB |
| Terminal Capacity |
1.5 mm² (16–20 AWG) |
| Mounting Type |
35 mm DIN Rail (EN 60715) |
| Enclosure Material |
Flame-Retardant Plastic |
| Ingress Protection |
IP20 |
| Operating Temperature |
-45°C to +75°C |
| Dimensions (H × W × D) |
90 × 18 × 68 mm |
| Grounding |
Protective Earth (PE) Connection |
Ordering Information
| Model Number |
Description |
| SN-TX/05 |
5 VDC Signal Surge Protector |
| SN-TX/12 |
12 VDC Signal Surge Protector |
| SN-TX/24 |
24 VDC Signal Surge Protector |
| SN-TX/36 |
36 VDC Signal Surge Protector |
| SN-TX/48 |
48 VDC Signal Surge Protector |
| SN-TX/110 |
110 VDC Signal Surge Protector |
| SN-TX/220 |
220 VDC Signal Surge Protector |
| SN-TX/230 |
230 VDC Signal Surge Protector |