24W/24VDC Industrial DIN-Rail Power Supply for RJ45 1-8 Port(Non-PoE)

Part number : GWS-DP24-24

Brand : GWS Power

Price : 2,268.00 Baht

(Dealer price can log-in/Ex-Vat 7%)

Minimum order quantity : 1 pcs

Warranty : 3 Year

OVERVIEW

GWS-DP24-24 is one economical slim 24W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.

GWS-DP24-24 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 85%, the entire series can operate at the ambient temperature between -40? to 70? under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make GWS-DP24-24 a very competitive power supply solution for industrial applications.

Feature

• Power Input: AC 90~264V

• Support production for short circuit/over current/over voltage

• Wide operation temperature range: -40?~70?

• 100% full load aging test

• High efficiency, long life time and high reliability

• Meet EMC Standard

Product Name	24W/24V Industrial DIN Rail Power Supply
Model	GWS-DP24-24
Group of Output	1
DC Voltage	24V DC
Default Output Voltage	24.00-24.2V ?VIN: 220VAC / LOAD: 0A?
Output Rated Current	1A
Output Current Range	0-1A
Output Rated Power	24W
Total Peak Output Power	Up to 36W(Sustainable time 10S/220VAC)
Peak Output Current	1.5A( Sustainable time 10S/220VAC)
Ripple Noise	Peak - Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz)
Output Regulation Range	22.5.V~28.0V
Stabilized Voltage Precision	±1% (@ 90-264Vac input, 100% load)
Line Regulation	±0.5% (@ 90-264Vac input, 100% load)
Load Regulation	±1% (@ 90-264Vac input, 100% load)
Temperature Coefficient	±0.03%/?
Output Start Time	< 3S @ 115Vac < 1.6S @ 230Vac (100% load)
Output Hold Time	> 20ms @ 115Vac (100% load)
Voltage Overshoot	≤5%
Input Voltage Range	90~264VAC
Input Rated Voltage Range	100~240VAC
Frequency Range	47Hz~63Hz
Rated Frequency	50/60Hz
Starting Voltage	90V AC
Efficiency	> 85.0% @ 115Vac, > 84.0% @ 230Vac
Input Current	< 0.60A @ 115Vac, < 0.30A @ 230Vac
Inrush Starting Current	< 60A @ 230Vac
Power Factor	>0.6 (at full load)
Over Power Protection	28.8~36W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.)
Over Voltage Protection	28~30V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage.
Over Current Protection	1.2~1.5A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.)
Short Circuit Protection	It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit.
Operation Temperature and Humidity	-40?70?; 20%?95%RH
Storage Temperature and Humidity	-40?~85?; 10%~95%RH non-condensing
Libration	Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Surge	Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude	2000m
Security Standard	GB4943/EN60950 ?Reference ?Certification
Dielectric Strength	Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test	Test Condition: 32A/2min; Ground bond: ?0.1 ohms.
Leakage Current	Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz)
Insulation Resistance	Input—Output: 10M ohms
Conducted Interference	EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference	EN55022, EN55024, FCC PART 15 CLASS B
Harmaonic Current	EN61000-3-2 CLASS D
Conducted Emission	EN61000-4-6 Level3
Radiated Emission	EN61000-4-3 Leve3 criterion B
Power Frequency Emission	EN61000-4-8 Level3
Electrostatic Emission	EN61000-4-2 Level4 criterion B
EFT	EN61000-4-4 Level4 criterion B
Surge	EN61000-4-5 Level4 criterion B
Dip and Interruption	EN61000-4-11